What does a pair of budget work boots mean to you? Do you prefer these to be nothing else but dirt cheap or featuring the essentials at an affordable price point? Well, cheap work boots should be the footwear that provides adequate safety and comfort in the workplace without costing too much.
Note: This site is reader-supported and we earn commissions if you purchase products from retailers after clicking on a link from our site.
Many low-cost products deteriorate within a couple of months, and you can’t consider them as the best work boots on a budget. The best steel toe boots should last for a year or two to qualify for this category.
What Are Steel Toe Boots?
A steel toe is a cap made of steel and installed in the toe box of the footwear used in the challenging workplaces. Such a design offers the maximum foot and toe protection. Most of these steel toe shoes meet the ASTM/ANSI safety requirements to shield the feet from impact and compression.
These boots are the best option for people working in a hazardous condition where there’s a high risk of getting foot injury by falling objects or bumping into heavy items. However, the metallic cap attracts to the magnet and a bit heavier than a composite toe. So, it could be a little uncomfortable if you need to walk for a long time or pass through metal detectors. You should better pick something else if you are a security personnel, meter reader, mail carrier, or work in a nuclear site.
How Do Cheap Steel Toe Boots Can Protect You?
Whether you buy expensive or budget footwear, the steel toe boots are a classic for a reason. Countless workers over the decades have used them as a tried and true method for protecting their feet on the job. As far as high impact and shock resistance go, these toes can handle more than the composite design.
It can be tricky to choose steel toe boots, but the right pair can offer something more than just saving the toes from accidental injuries. It will allow you to work on various terrain and safeguard from the ankle sprain, harsh temperature, electrical hazards, and other threats.
Prime Quality that Cheap Work Boots Should Have
Do you want to buy a pair of work boots that will make your every dollar count? Well, there are plenty of choices in the market, and you will have quality products from many leading brands. But, chasing after the brand names will cost you a good amount of money. If the budget is tight, try to find cheap shoes with these features, so you don’t have to worry about the strength and shelf life.
Materials & Build
The leather is the preferred choice of many workers as the upper material of the work boots because it guarantees superb fitting, comfort, and longevity. There are many budget models that use leather, but the cheapest products may use PVC, nylon, or other synthetic materials. The nylon upper is not very comfortable but still assures a long life but you can’t depend on other materials should your workplace is hazardous.
The metal eyelets and D-rings are better than the fabric loops. The EVA midsoles and rubber or Thermoplastic Polyurethane (TPU) outsoles are excellent for absorbing shocks and provide resistance to oil, abrasion, slip, and other tricky conditions.
How the boots have been put together determines their durability and rigidness. The stitch down method is the most durable where a strong material is placed between the upper body and the outsole, and all the parts are secured with stitching. Goodyear welt is the most popular sewing technique.
Another two methods are the direct attach and cement construction. The first process is known as molding that allows the outsole to mold on the upper material. It is better than the second technique that simply glues together the two parts.
Just because you can’t afford footwear with a bigger price tag does not mean that you have to sacrifice the comfortability feature. In fact, it is something that should never be ignored while choosing work boots.
The comfort factor mainly depends on cushioned footbeds, steel shanks, EVA midsoles, and ergonomic outsoles. Each of these attributes confirms the best fitting and support for your feet, resulting in fatigue and strain free feet at the end of the day.
Besides, padded tongue and collar and the lace-up system facilitate better fitting around the ankle and vamp areas. It will prevent your feet moving inside the shoes and thereby having blisters.
Quality work boots help you get the job done and last almost forever. However, you cannot expect the cheap products to serve years for a man that works 14 hour days in construction sites. Spending on brand products is an investment, but if your wallet does not approve it, you have to comb through the market for decent-quality boots at reasonable prices.
Features that guarantee a longer lifespan and best services are upper made with quality leather materials, sturdy laces that don’t tear off easily, and reinforced outsoles with excellent resilience.
Every worker must wear boots with protective features, and the steel toe models are the best for the dangerous jobs. If your work involves hauling or dragging heavy objects you’ll lose counts how many times your shoes will save the feet from being crushed by falling machinery.
Inexpensive footwear also comes with safety features. You must check whether these have the electric shock resistance and non-slipping outsole. Having these features will help you survive in unsafe workplace conditions.
Getting a pair of steel toe work boots that are cheap but high quality is difficult but not impossible. Follow these brief reviews to get the best finds in the market when your wallet is thinner.
Top 10 Best Cheap Steel Toe Work Boots – Complete Chart 2019
|1. Stanley Men’s Dredge Steel-Toe Work Boot||Removable EVA insole with additional EVA cavity for excellent cushioning||$$||4.4|
|2. Caterpillar Plan Steel Toe Work Boot||Genuine top grain leather uppers||$$||4.4|
|3. KINGSHOW GW 1606ST Steel Toe Work Boots||Good Year Welt, Slip Resistant||$$||4.4|
|4. Condor Idaho Steel Toe Wheat Nubuck Work Boot||Thermoplastic polyurethane (TPU) outsole is oil, slip, abrasion resistance, and flex tested||$$||4.4|
|5. Condor Wyoming Steel Toe Work Boot||Oil and slip resistant outsole to meet industrial standards||$$||4.4|
|6. KINGSHOW 1366 Water Resistant Premium Work Boots||Crafted in premium nubuck leather||$$||4.3|
|7. Dexter Douglas Steel Toe Work Boot||Oil-resistant lug outsole||$$||4.3|
|8. ARCTIV8 TITAN-S Pro Steel Toe Work Boots||Goodyear Welt construction rugged durability and Slip Resistant||$$||4.2|
|9. EVER BOOTS “PROTECTOR” Steel Toe Work Boots||EH protection passes 18,000V standards at 60 herts for one minute||$$||4.0|
|10. Shoe Artists SAFETY STEEL TOE Leather Work Boot||Double to triple stiched uppers for extra toughness||$$||4.0|
The Dredge Steel Toe Work Boots from Stanley grabs the top position of this list because of its extreme durability, rock-solid toe protection, and excellent comfort underfoot. The upper may feel a bit hard on the vamp, but they tick off most of the features of quality low-cost work shoes.
Materials & Build
The full-grain upper leather is tough while the fine stitching adds to its durability even more. The material fends of abrasion and not susceptible to wear and tear. The side panels are stretchable fabric.
The synthetic outsole shows resistance to slip and oil to give you protection on slippery surfaces. The upper and the outsole are attached with a secure bond. So, it will not easily give you even if you jump into small puddles of water.
These are Chelsea-style footwear that wears a casual appearance. The upper may feel hard and scratchy on the skin at the beginning but should ease out after the break-in period. The absence of padding at the collar may make it rub around the ankle though using long socks will be relieving.
The shoes do not have any lace-up system, but the stretchy side panels allow for quick on and off. The fitting is so nice that these are water tight up to the top!
The EVA insole has additional EVA cavity for excellent cushioning and extra comfort. The steel shank gives proper support underfoot to help you get through any tough work day. You can even remove the footbed for a cozier alternative.
The leather material used in these shoes is top-quality and is unlikely to collect scratches or tear. The stretchy sides will extend as required but have thesufficient elasticity to not to become flaccid.
The synthetic outsole is PU injected that makes it lightweight and flexible. You can expect it to withstand the impact of hard terrain and scruff of rough surfaces.
The boots have moisture wicking lining that keeps your feet dry and smell-free in hot and wet climate.
The steel toe caps meet the ASTM safety standards, guaranteeing to guard your feet against substantial impacts from rolling or falling objects. These will also protect against deadly electrical shocks around open circuits.
- The upper is made of full-grain leather
- Removable EVA insole
- Steel toe cap meetscompression ratings and Electric Hazard standards
- Synthetic outsole is resistant to slip and oil
- No pad in the collar and tongue
- The leather material may feel hard on the skin
The only reason these Caterpillar Plan Steel Toe Work Boots rank second on this list is their suede and nylon upper. While the materials are not low-quality in any sense, these can’t match the excellence of genuine leather. These are also a bit expensive than the Stanley models, but you will get top-notch comfort and safety features.
Materials & Build
The shoes feature a suede and nylon upper and synthetic sole that extends to the toe area. These materials are supposed to hold well against usual scrapes and grazes while the sole will give proper support no matter the type of terrain you set your foot on.
The double stitching makes the boots look cool and heavy-duty. The metal eyelets, D-rings, and studs not only provide a better fitting but also add to the overall build strength.
The suede leather is certainly more comfortable than the hard type used in Stanley’s Dredge collection. The padded tongue and collar wrap around the ankle with coziness. In addition, the breathable nylon mesh lining is relieving for the feet in warm and humid conditions.
The supportive rubber midsole feels lightweight while the microfiber insole gives your feet the cushioning they need. You can even remove the footbed and replace with custom orthotics to suit the shape and condition of your feet.
The speed lacing system with top hooks and metal grommets offers a better fitting. Use it for tightening the vamp and ankle areas.
The suede leather and nylon material will deal with abrasion like a pro. You can expect them to serve for a long time. However, these are not waterproof so be prepared to deal with wet socks and feet while working out in the rain or wet grasses.
The hardware and laces are reliable and unlikely to give up easily. Nevertheless, you should not soak the boots in water to ensure their long life.
The synthetic outsole is robust and won’t let your feet feel a thing while walking on uneven, hard surfaces.
The Plan collection comes with toe caps that feature steel plate, and CSA certified Grade 1 steel toe. These are tough as nails. So, no heavy objects or machinery can cave them in and smash your toes. The caps are also equipped with electrical hazard protection, allowing you to be completely safe during your day at the job site.
- Padded collar and tongue
- Supportive rubber midsole
- Speed lacing and metal grommets
- Flexible rubber outsole
- The construction is a bit heavy, causing slight mobility problem
- The upper is not entirely leather
- Not waterproof
The GW 1606ST Steel Toe Work Boots comes behind the Stanley and Caterpillar models because of having less protective and comfort features. Although these stand out of the rest with their premium-quality nubuck leather upper and Goodyear welt construction. These also cost less than the top two listed products and only a fraction than what you have to pay for a pair of name-brand boots.
Materials & Build
The upper is made of pieces of nubuck leather that are held together by stylish double and triple stitching. The leather material is full-grain and genuine that is not going to degrade easily. Besides, the synthetic outsole is flexible but has enough rigidity not to break off so easily.
The boots will have some extra marks for the Goodyear welt construction, which is rare to find in low-end footwear. Considering the quality of the upper material and the stitching technique, you can rely on these shoes for years to come.
The nubuck leather is smooth and soft to touch. Throw in the mix the padded collar and tongue, and you will get a pair of snug boots, wearing which gives a delightful feeling. The breathable mesh lining further takes care of the feet by wicking moisture and odor away.
The speed lacing system with studs offers a snug fit around the vamp and ankle. However, the shoes don’t have cushioned footbed or EVA midsole to support the feet needed for all-day standing and walking.
The use of genuine nubuck leather and a solid stitching technique will definitely make these shoes last longer. The metal hardware and synthetic outsoles further add to their endurance. They can withstand the toughest external conditions and wear out very slowly.
The lower-cut boots have safety steel toes to safeguard your feet from falling metal beams or other objects. But, these are not rated for electrical hazard or ASTM safety requirements. So, don’t take them in nasty workplaces.
The rubber outsoles are pliable and non-slippery, giving you confidence on slippery terrain. However, the shoes are not waterproof. The leather material resists water to some extent, but your feet will get wet ultimately.
- Genuine full-grain Nubuck leather
- Non-slippery synthetic outsole
- Reliable bonding made with Goodyear welt stitching
- Speed lacing system for quick adjustment
- Not waterproof
- The break-in time could be longer than usual
If you consider the quality, the Condor Idaho Steel Toe Work Boots will appear to be on par with KINGSHOW’s GW 1606ST. But, what keeps the second one in the third position is the excellent quality leather upper and the Goodyear welt binding technique.
However, the Idaho collection will also rank higher in any list of cheap workplace footwear. The solid construction and beautiful design give them a tinge of quality and classy appearance.
Materials & Build
Genuine nubuck leather goes into the making of the upper, making the exterior look very smooth and gives the boots a premium feel. The TPU outsole is highly durable that is unlikely to break off under pressure or rough conditions.
The contrasting stitching seems reliable that holds all the upper parts nicely together. The grommets and studs are metal and don’t appear to break off easily. The bonding is done with the direct soling technology that binds the outsole directly to the upper. This method definitely creates a more lasting bond that cement construction.
The nubuck leather feels very soft on the skin after the break-in period, which may take some time. Condor ups the comfort factor with padded collar and tongue. Besides, the breathable mesh lining inside save your feet from choking.
The PU insole and midsole offer ultra-cushioning coziness and excellent support. The lacing system provides quick adjustment and great fitting to these lower-cut style boots.
The use of 100% genuine leather and the direct soling system without any glue leave no doubt about the sturdiness of the work shoes. The top-of-the-line quality leather gives the feeling that these will last for a long time, and they do, indeed!
The laces and the eyelets will also hold well given that you don’t expose them to water. The flex tested TPU outsole is supposed to last long and gives protection in case of any danger from the underside.
The steel toes of the shoes are ASTM certified, meaning that these are resistant to compression and impact. So, your feet will be safe even if some metal items suddenly fall on your toes.
The thermoplastic polyurethane outsoles absorb shocks and disperse it throughout the bottom of the feet, relieving them of fatigue and pain. You will also get top-notch resistance to abrasion, oil, and slip.
- Nubuck leather gives the shoes a smooth, classy look
- PU insole and midsole
- TPU outsole is flex tested
- Direct soling makes a solid bond
- Not waterproof
Except for a few differences in design and color, the Wyoming collection from Condor is almost the same as the brand’s Idaho line. Both the models share the same features, but the use of genuine nubuck leather has given the first one a few extra points.
Materials & Build
The upper is crafted with original full-grain leather with patches of mesh nylon on the sides. There’s also mesh fabric lining inside for breathability and comfort. The synthetic outsole is robust as well as flexible, aiding your feet to step into any kind of surfaces.
The bonding of the outsole and upper has been done by using the AM-TECH Direct Soling Technology without the use of glue for lasting endurance.
If there’s any doubt about the comfortability factor, the use of 100% full-grain tumbled leather will relieve it. The thick padding in the ankle and tongue will snugly wrap around your feet. The mesh patches and the lining inside let the feet breathe freely and keep away moisture and odor.
The single-density polyurethane (PU) midsole offers lightweight comfort with an ultra-cushioning feel. It gives great support underfoot so that there’s no pain or ankle sprain at the end of a long working day.
The fitting of the boots is superb with the lace-up system. It has four studs for quick tying up and adjustment.
The 100% genuine leather and direct soling should be convincing enough about the stamina of these shoes. The TPU outsole and the unique toe cap are excellent for added protection. One interesting feature is a TPU toe guard that seems to be an extension of the sole. It enhances the safety property of the toe area.
The directly injected sole construction warrants that it will never fall apart no matter how roughly you use the boots.
The steel toe is certified for resisting impact and compression. You can go to the workplace without worrying about foot injuries caused by falling of heavy or sharp objects.
The outsole meets industrial standards with excellent oil and slip resistance. It has structured lugs for excellent traction, and its design absorbs shocks like a pro.
- Made of genuine leather
- Excellent breathability
- TPU outsole and extra toe protection
- Not certified for electrical hazards
- Not waterproof
- The synthetic laces may tear off quickly
KINGSHOW is a trusted name when it comes to quality work boots at an affordable price. The 1366 model is another product from this brand that offers comfort, decent safety features, and above all value for money. Priced at less than $50, these are available at both low-back and high-collar styles and in stylish wheat and black colors.
Materials & Build
Genuine nubuck leather goes into the crafting of the upper side of these boots. The premium quality of the leather material is reinforced with the metal grommets and double and triple stitching technique.
The direct injection molding of the sole is better than cement construction and ensures that it won’t just fall off suddenly.
The genuine leather upper is soft and smooth to touch, so your feet are going to enjoy a velvety feeling all day long. The padded collar and thick tongue cushion provide extra coziness and help with a snug fitting.
The speed lacing system with grommets and studs allow for quick adjustment. The breathable mesh lining inside and the cushioned insole will take extra care of your feet.
The premium-quality nubuck leather is as tough as nails. However, these are light duty boots that won’t survive in extremely harsh conditions. The material resists water for some time but will give up eventually and become saturated.
The upper material, the soling, and the hardware are supposed to last a couple of years if you keep the boots away of water as much as possible.
The biggest downside of the shoes is that these are not steel toe. The soft toe has reduced the weight though, and you can wear them almost like sneakers.
The outsole provides enough traction to prevent skidding in wet and oily conditions. However, these are not safe to wear in workplaces where you have to deal with heavy machinery or work in proximity to live electrical outlets or wires.
- Look attractive with smooth, nubuck leather
- Available in both low-cut and high-collar designs
- Lightweight construction
- The rubber outsole prevents skid
- Resist water but not waterproof
- Soft toe
- Not suitable for hazardous work environments
- Not rated for electricity or impact and compression
The Douglas collection from Dexter is one of the most affordable steel toe boots sold in the market. The cheap footwear surprisingly has a couple of nice features to provide the wearers with good fit and decent protection. At less than $50, you will get a pair of beautiful shoes available in three different colors.
Materials & Build
The upper is made of leather but not original material. It is a manmade material that looks smooth and soft. The strong double and triple stitching have firmly held the shape. The metal grommets, synthetic laces, and rubber outsole have further added to the stability of the overall structure.
These are not super cozy but the artificial leather is soft, and the padded collar and tongue offer a snug fit. The breathable mesh lining saves your foot from suffocation and wicks away moisture.
The memory foam insole is very squishy and gives a cushion-like feeling underfoot. However, it’s fragile and won’t provide much support if your work needs you to carry heavy things from one place to another or stay on foot all day. You can replace it with another footbed that suits your feet.
The sizing is alright unless you have very wide or thin feet. Nonetheless, the sturdy upper with the quick lacing system will ensure a nice and comfy fit.
The boots with their synthetic upper, rubber outsole, and steel toe appear to be durable. These will not deform even after taking the blows of heavy items on the toes. The sole is soft but won’t wear out easily.
The material resists water, so your feet will be dry even when trekking through water puddles and snow. However, it will not hold in heavy rain or if the water level rises above the eyelets.
The footwear comes with oil-resistant lug outsoles that will give you protection in an oil-filled environment. Nevertheless, the traction works better outdoors rather than indoors with concrete floors.
The steel toe caps guards against the falling of weighty objects, but these are not certified for electrical hazards.
- Stylish design and available in three different colors
- Memory foam insole
- Oil-resistant rubber outsole
- Steel toe
- The material is not waterproof
- The toe caps are not electrical hazard certified
The TITAN-S Pro from ARCTIV8 is a familiar name in the pool of cheap work boots for their great design, comfortable features, and enduring construction. You will get a pair of stylish shoes in three different colors at less than $50!
Materials & Build
With the high-collar style, the TITAN-S Pro carries a cool design that will suit the masculine nature of industrial and construction workers. The upper material is full-grain nubuck leather, and the outsole is synthetic rubber. The triple stitching and the polished metal grommets seem to add a nice touch to the overall look.
The Goodyear welt construction is certainly impressive in such inexpensive shoes. It creates a strong bonding between the upper and the sole.
The nubuck leather and the padded collar and tongue offer premium comfort to the skin. The roomy toe area allowsyour toes to have some space inside the boots. The fitting is excellent, which is enhanced by the speed lacing system.
The footbed and the shank give your feet the adequate support they need for standing for a long time. However, you can use orthotics if you have any special condition such as ankle sprain or Plantar Fasciitis.
The premium nubuck leather ensures long-lasting wear and comfort. The outsoles are rigid enough to provide adequate support on tough terrain. No matter how harsh the environment of your job site is and how hard you abuse the shoes, rest easy by knowing that the bad boys have your back.
The boots are not waterproof, but you can still wear them in snow or wet conditions. These will be your perfect walking buddies in any environment.
The steel toe caps are ideal for heavy industrial and construction work. These shoes meet the OSHA protection and ASTM safety standards, so they are safe even in the toughest of job sites. In addition, the outsole is slip resistant, so you have absolutely nothing to worry about the workplace safety.
- Stylish design
- Goodyear welt construction
- Slip resistant outsole
- Steel toe meets ASTM and OSHA protection standards
- Roomy toe area for comfortable fit
- Not waterproof
- The midsole is not molded EVA
Any working person with a taste for style will surely like the Protector Steel Toe collection from Ever Boots. Available in both high-collar and low-cut designs, the shoes look hip with a black body and yellow accents. The stylish side cuts have further added to its groovy look. The great news is you can purchase a pair at less than $50!
Materials & Build
The upper is made of a leather material with a synthetic fabric at the cuts and tongue. The leather is unlikely to be genuine, but it looks smooth and nice. The outsoles are synthetic rubber that creates an inseparable bond with the upper part through a direct soling technique.
The upper is soft to touch, and padded collar and tongue offer coziness for the ankles. The steel shank ensures the stability while the PU midsole provides long-lasting cushioning and support underfoot.
One plus point of the shoes is that these are not too heavy, so it’s not exhausting to work in them for hours. However, the insole is thin and is unable to provide much arch support. The best option is to replace them with a pair of high-quality orthotics.
The shoes offer a nice fitting with a speed lacing system. However, the sizing runs a half size bigger than the popular brands like Caterpillar and Timberland.
Although the upper is not original leather, it will give decent performance in terms of endurance and comfort. The D-rings and studs are made of a rubber material, not metal, which will definitely cut some points in this section. These are unlikely to take abuse and survive under pressure.
On the other hand, the rubber outsoles are durable and are firmly attached to the rest of the structure.
The steel toe shoes have EH protection that will safeguard up to 18,000V at 60 herts per minute. Besides, the rubber soles have good traction and shoes resistance to oily and slippery surfaces. So, these boots will suit the needs of a wide variety of working people ranging from mechanics to electricians, plumbers, linesmen, engineers, warehouse workers, and more.
- Stylish design with a hip look
- Available in both high-collar and low-cut designs
- PU midsole and steel shank provide added support
- Offer EH protection up to 18,000V
- The upper is not original leather
- The D-rings and studs are rubber
- The insoles are thin
The Safety Steel Toe work boots from Shoe Artists carry a highly masculine look. At a cheap price point, these shoes offer some serious protection in hazardous job sites. These are heavy duty, and you can expect a pair to last for years.
Materials & Build
The upper is made of a thick leather though it’s unlikely to be the original material. It’s unlikely to last as long as genuine leather, but you can expect an average lifespan if not exposed to water and humid conditions.
The bonding between the upper and the outsole has been done by using the Goodyear welt technique. Such a sturdy industrial construction has given these the attributes of quality work boots.
The artificial leather material is smooth and soft that is unlikely to rub against your skin. In addition, the thick padded collar provides a warm, squishy feeling around the ankle area.
The soft insoles give enough cushioning and support. You can also take them out for cleaning, drying, or replacing with more supportive footbeds.
The shoes have a lacing system with metal grommets for a better fit. However, these are a bit narrower than other similar products. You should buy a half or one size bigger to have enough room inside.
The artificial leather material is a downside, but the double and triple stitching shapes it nicely and adds extra toughness. The outsoles will also last for a long time with their rugged rubber tread.
Lastly, the Goodyear welt construction has made the structure as tough as nails. It allows you to change the worn out sole as many time as you want, dramatically increasing the lifespan of your favorite boots!
The boots are suitable for cold weather because of their superior padded insulated linings, which are a big plus point for any steel toe footwear. You can wear them even if you work inside a giant freezer!
The steel toe caps give protection from bumping into sharp objects, or heaving things dropped off forklifts. Besides, the rubber lug outsoles are top-notch when it comes to ensuring superior traction on tricky surfaces.
- Padded tongue and collar
- Goodyear welt soling technique
- Insulated padded linings
- Steel toe caps
- Upper is made of artificial leather
- Size is narrower compared to the counterparts
Do Your Steel Toe Boots Hurt?
The most common complaint against cheap steel toe footwear is that these hurt the feet. Well, it’s true because people make the mistake of buying the shoes shorter thinking that they will stretch over time. Wrong! Steel toe boots, especially the inexpensive ones that don’t use top-notch leather materials, stretch very little.
Besides, the products of the cheap brands are often a size bigger or shorter than their expensive counterparts. Purchasing a half or one size larger than what you typically wear will solve this problem. If they are slightly loose, you can fix the problem by using extra thick socks.
However, buying a pair with a loose fit is a mistake too. Many people do that if they find a particular size is rubbing the toes. You just have to find shoes with the proper length so that the end of your toes don’t touch the end of the toe cap. Spending money for a wider width won’t help in this case.
Do Socks Help in Increasing Comfort?
Yes, they do! Socks specially manufactured for steel toe boots add an extra layer of cushion on the sides and top of the toe areas and around the heel and ankle. These are slightly expensive, but they are extra thick and last for a long time. However, don’t use them if your boots are comfortable enough because the extra padding will make the fitting tighter.
What Are Your Favorite Cheap Steel Toe Boots?
We’ve tried to cover the best options available in the market in this category. If you can pick up the right size, these shoes will keep your safe and pain-free at the end of the day. However, let us know if your favorite models have been left out.
- Top 15 Best Cheap Work Boots in 2021 – Complete Guide - August 24, 2019
- Top 10 Best Work Boot Socks in 2021 – Complete Guide - April 18, 2019
- Caterpillar Men’s Second Shift at Work Boot Review - January 22, 2019