Top 10 Best Logger Work Boots in 2021 – Ultimate Guide

Best Logger Work BootsLogging work is an adventurous affair. While you are hacking down those large beasts, you need all the protection you can get. You need to be sure your feet are stable and weather-proof. Logger boots are specially designed to provide support, traction and safety to your feet. Out in the wildland, you might face unknown challenges. A sure footing and balance can prevent many accidents. Besides, the tough guys need a tough boot to go with their roles. Some manufacturers may not take your well-being seriously but we do. Which is why, we selected the 10 best logger boots for you. They range across features and price-range but they all bang big for bucks.

Note: This site is reader-supported and we earn commissions if you purchase products from retailers after clicking on a link from our site.

What are special features of logger boots?

Most of the logger boots have some specific qualities that cut them out for a lumberjack’s taxing work:

High heels: People are often baffled by the high heels on a logger boot. Heels have got to be uncomfortable, right? Think back to the times you walked on uneven ground. Which part of your foot do you place first? It’s the heel. Heel digs into the ground a bit and allows you to gain hold. The high heel also digs into the ground when you go downhill, dig lines or saw. Walking on slimy logs and wet forest debris is a job requirement. Heels help you stand or walk steadily in all these situations.

Steel Shank: Most of the best logger boots have steel shanks in their outsoles. A shank is a flat stretch of material packed inside the outer sole. It sits along the narrowest part of your feet just under the arch. Any impact that comes from standing on the ladder rungs or stamping on rough, jarred earth all day is soaked up by the steel shank. Considering the amount of abuse lumberjacks put their feet through, steel shanks ensure that at the end of the day the bottoms of your feet aren’t bruised. Steel shanks are usually flexible enough to move naturally with your body.

Reinforced toes: Ever had something slip out of your hand and fall on your toes? Those squiggly little toes seem to hurt more than any other part of the body. The best logger boots have toes designed with extra reinforcements. Steel toes are common as they can bear a lot of extra weight falling on them. Some of the best logger boots selected here also have composite toes. These provide moderate protection but they don’t get as hot or as cold as the steel toes. So if you work at a place with extreme temperatures, composite toe boots are the better fit.

Weather-resistance: The same elements: earth, fire, water, that give us life also damage the cheap boots. The best logger boots selected here have some water-resistance which keeps your feet from getting soaked in the wet forest floor. Some have a Gore-Tex cover. This is a highly water-resistant and breathable membrane. It keeps the feet dry and free of noxious smells.

Insulation: If you live in a cold area, we suggest you buy the best insulated logger boots to keep your feet warm. These days work boots come lined with what we call thinsulate. As the name suggests, it is thin but warming. So your boots remain the average weight even in winters. If you work in warm areas, you probably don’t need the insulation. We have covered boots both with and without insulation.

Ankle support: The ankle shaft of the logger boots run up the ankle around 8” or more. This supports the feet while you walk on rough terrains. It keeps the ankle from rolling while allowing the forefoot to move freely.

Lug pattern: The logger boots usually have an aggressive tread pattern on the underside. This works with the high heel to provide traction on the irregular forest land. You will be in limited danger of slipping on wet leaves and loose earth.

ASTM standards: Many logger boots meet the standards of American Society for Testing and Materials. This standard lays down the minimum requirements for the design, performance, testing and classification of protective footwear. 

Logger Boots vs. Wildland Firefighting boots vs. hiking boots vs. lineman boots

Logger boots are tough footwear protected from all sides against any sudden shock from log rolling. They use a steel shank for arch support. They are designed to provide traction on uneven ground. They are built high for ankle support and they have lugs at the bottom for a good grip on the ground.

Firefighter boots use custom materials that are resistant to high temperatures. A leather shank is inserted for a high arch which helps when you have to step over burned debris. They usually use silicone-tanned leather and Vibram soles which are both fire-resistant. Firefighter boots go for soft toes instead of metal toe caps.

Logging work might involve you to hike through some distance. But it’s usually a short distance. Hiking boots provide exceptional support for fast-paced walking on rough dirt tracks and stones jutting out of the ground. But they may not provide the same toe and upper-foot protection. Hiking boots are lighter than the work boots though. If you are into fast-hiking, look at track-running shoes.

Lineman boots are for folks who have to climb up the slim rungs of the ladder. They usually have very strong steel shanks. They are 14”-20” high and sometimes even come up to 38”. True lineman boots have rings and grommets for connecting climbing gear. They have extra leather patches on the sides to protect the foot from impact of scratching while climbing. 

What’s with the kiltie on loggerboots? What is it used for?

A kiltie is a pretty tongue with jagged edges that peeps out of the laces. This is a false tongue measuring around 8 inches long. The tongue under the bootlaces used to be made of thin leather. The bootlaces could rub on it and wear it out. This would also rub against the upper side of the foot. The kiltie would get in between and take the impact itself. Now-a-days the thick gusseted tongue needs no extra protection. But the kiltie has become a trademark sign of the logger boots. 

The key features of high quality best logger boots

We are people who have fallen one too many times for boot fraud, buying ones that fell apart faster than an IKEA bookshelf. So we carefully selected the 10 best logger boots based on the following points:

Traction: The best logger boots selected here have proved their ability to claw on to the ground, wet and dry alike. The high heels are rough enough to dig into the terrain. The lugs on the sole keep you stationed tight on any place. Even when you step on the logs, these stay straight.

Support: The best logger boots maintain the heels and ankle shaft such that your ankle does not roll but you still get the benefit of the heel. The insoles keep your feet fresh through 10+ hours of standing in them. The heel and toe portions are springy and keep you upright.

Protection: Steel toes and top-quality materials make these best logger boots well-protected against the accidental rolling of logs. Not only do they keep your feet in one piece, they also stay undamaged themselves.

Durability: You would be putting the logger work boots through hell. Weight falling on them, mud, debris, pebbles can break them down fast. We checked that the best logger boots can take the constant abuse without falling apart.

Budget: We covered the best logger boots in various price categories. The aim of this list is to have something for everyone. But we ensured all these selected boots are worth their price.



Name Feature Price



Name Feature Price


  1. Chippewa Men’s 9″ Waterproof Insulated Steel-Toe EH Logger Boot  Insole:Texon 460 waterproof $$$ 4.6 
  2. Timberland PRO Men’s Rip Saw Composite-Toe Logger Work Boot  Vibram Fire & Ice outsole for optimal performance $$$ 4.5 
  3. Wolverine Men’s Buckeye Non-Insulated EAA Safety-Toe 8″ Logger Work Boot  Vibram rubber lug outsole for better traction $$  4.4
  4. Georgia Boot Men’s Loggers G7313 Work Boot  Abrasion-resistant rubber outsole $$$ 4.4 
  5. Men’s Carolina CA5821 8 inch 600 Grams Thinsulate Insulated Steel Toe Logger Boots Copper  One Piece Rubber Lug Outsole $$$ 4.3 
  6. Chippewa Men’s 8″ Waterproof Insulated Steel Toe EH 73050 Logger Boot  400 grams 3M Thinsulate Ultra insulation $$$ 4.3 
  7. Danner Men’s Super Rain Forest 200 Gram Work Boot  Insulated;Waterproof $$$ 4.3 
  8. Chippewa Men’s 8″ Bay Apache Waterproof Insulated Steel Toe EH 26330 Lace Up Boot  Maple Taibrelle lining with Texon Insole orthotic insole $$ 4.3 
  9. AdTec Men’s 9-Inch Logger Boot  Oil resistant lug outsole $$ 4.2 
  10. Justin Original Work Boots Men’s Jmax Logger Steel TE Steel Toed Work Shoe  Water proof full bootie construction $$$  3.9


  1. Chippewa Men’s 9″ Waterproof Insulated Steel-Toe EH Logger Boot

Popularly known as Chippewa Super Logger boots, these are the boots that even construction workers love. They have every feature from the book of logger boots. Insulated, waterproof, steel toe, steel shank, they have all the doodads to keep you comfy and protected. These are moderately expensive but the aggressive Vibram tread is reassuring. The top-quality construction while packing all these features is what led them to the top place in the best logger boots list. There are also a lot of choices for the best steel toe boots.


Chippewa 9” Super Logger boots are classy leather affair. The name comes from the fact that the ankle shaft stands 9 inches high from the arch. These follow the Goodyear welt construction. In this, a strip of leather is attached to the boundaries of the outsole. The advantage of this construction is that it makes the boots waterproof. It also makes re-soling the boots pretty easy as the upper of the shoe becomes a separate piece. Goodyear welt construction requires an expensive manufacturing method and it’s considered one of best shoe construction methods in the industry. They have a 2” logger heel which provides excellent grip along with the lugs.

These logger work boots have a Vibram Tacoma outsole. The lug design at its bottom has been carefully designed to brake your feel on loose soil, for slip resistance on smooth ground and for oil resistance. The lug pattern is aggressively-shaped for extra stability over the logs. The best part about the Vibram sole is that it maintains the same grip even during freezing winters. Super Loggers are covered in Chip-A-Tex waterproof membrane. While it keeps the water out successfully, it allows the boots to breathe properly. So you won’t have to deal with any foul odors after a long day.

The Chippewa Super Logger boots have a steel safety toe that can stand heavy impact and compression. They confirm to ASTM F2413-05 standards which means they don’t conduct electricity and keep you safe if you step over electrical hazard. Chippewa claims that these boots are handcrafted in USA. The upper of the boots feature speed hooks for quick lacing. The sturdy laces are waxed so that they stay put in the position you have tied them. The other hardware on the boots like grommets and rings are rust-resistant. Triple-stitched seams ensure that all parts of the boots stay sewn together. They are available in Black Oiled and Bay Apache colors.

Comfort and Fitment

The Chippewa Super Logger boots have been put through the paces to absorb all shocks. The thick sole takes the worse kind of lashing without ever letting your feet know.  They pack a triple-ribbed steel shank that supports the ankle and the arch of the foot on all types of territories. They are insulated with Thinsulate Ultra insulation. They allow the feet to move freely while providing warmth. 400g of 3M Thinsulate keeps the feet warm. The Dri-Lex lining of the boots also wicks away sweat from your feet continuously.

There is no break-in period for these logger boots. The orthotic insole is waterproof and removable too. They are available in sizes 6.5 to 14. They generally fit exactly as expected. The toebox could be wider to accommodate wide feet but it’s not exactly suffocating.


  • Goodyear leather welt construction
  • Steel toebox
  • Grippy, non-conducting Vibram soles
  • Moisture-wicking Dri-Lex lining
  • 400g 3M Thinsulate lining
  • Proprietary lightweight waterproof membrane


  • Toebox is not too roomy for wide feet
  • No traditional kiltie


  1. Timberland PRO Men’s Rip Saw Composite-Toe Logger Work Boot

The Timberland Pro Rip Saw logger boots are designed to be ultimately comfortable in various activities like logging, construction work, wildland firefighting etc. although they aren’t NFPA-rated. Looking like traditional tough boots right down to their kiltie, The Timberland Pro come in different widths for the same size. So they can accommodate narrow and wide feet. These are available in a cheaper Soft Toe model and a Steel-toe model as well. We respected the options that these boots gave us, so we walked them straight to the best logger boots list.


The Timberland Pro Rip Saw Logger work boots have a leather upper. The rest of the area is done in Ever-Guard leather which provides abrasion resistance. So in spite of the price, you don’t have to worry when walking through scratchy surfaces. They have a waterproof leather lining which keeps your feet dry up to at least 6 inches of water. This much area is watertight because of the kiltie. The ankle well sits 9 inches high from the arch. The top of the ankle shaft has both eyelets and hooks for lacing. The hooks allow quick lacing while the eyelets allow you to tie them up securely and tight against sawdust.

These logger boots have a 2” heel. The platform under the feet is 1” high. So the heel on the boots does not feel uncomfortable or affect your posture much. They have a Vibram Fire and Ice sole with drastic lugs that perform at any temperature. The insole carries a puncture-resistant steel shank. The boots have a mesh lining with antimicrobial treatment to prevent growth of bacteria. Due to their Anti-Fatigue technology, you literally get a spring in your step. It is said to redistribute energy to key areas of your feet. That probably means if you stub your toes, the energy will be used to help you walk! While this might just be marketing-speak, the Pro Rip Saw definitely add some spring action to your walk. These meet the CAN/CSA-Z195-02 safety standards.

Comfort and Fitment

Timberland Pro Rip Saw are easily one of the most comfortable logger work boots on this list. The sole feels stiff enough to support your walk but not so much that standing in them is uncomfortable. The sole also dumbs down the effect of walking on gravel. You feel like you are walking on flat ground. The ankle shaft can be tied tightly around your leg with the laces. This keeps the ankle locked tight. The toe box has plenty of space, so your forefoot can move freely.

These logger boots are available in two widths on every size: medium and wide. Based on the structure of your feet, you can find the comfortable fit. These generally fit well.


  • Composite/Steel/Soft toe models
  • Puncture-resistant steel shank
  • Waterproof up to 6-7 inches
  • Grippy Vibram fire and ice sole
  • Light foam insulation
  • Scratch-resistant surface


  • Laces are ordinary and easy to wear away


  1. Wolverine Men’s Buckeye Non-Insulated EAA Safety-Toe 8″ Logger Work Boot

Wolverine’s 5634 Buckeye 8” logger work boot gets in your face with its rather frilly kiltie and top-class construction. With a full-grain leather construction and Gore-Tex in play, these can only be considered premium. But the pricing is reasonable. These are versatile in their use too. Construction, logging, bush work, foundries, metal fabrication environments etc. suit these boots well.  We found a wide audience that thought these are one of the best logger boots.


The Wolverine 5634 Buckeye logger boots immediately draw your attention to their Full-grain leather. This is the best quality of leather which retains most of its natural air circulation even through the processing stages. The boots are lined with Gore-Tex waterproof membrane. This has a widespread reputation for being highly water-tight but breathable. But like any membrane, it will allow water in if you submerge the boots in water continuously for long periods.  Buckeye boots also follow the Goodyear Welt Construction like the Chippewa Super loggers. The welt separates the upper from the sole, making re-soling easier. A beautiful kiltie looks out of the laces.

These logger work boots have an Aluminum alloy toe. The ASTA EAA safety toes can protect you from the weight of logs. They are lighter than steel but stronger too. They have Vibram outsoles with rubber lugs with a 2.25” heel. They brace upon loose soil and gravel easily. The heel is not uncomfortable. The outsole bears most of the shocks from jarred rocks and small stones. Your feet don’t feel fatigued after long hikes to the logging area. The boots are oil and slip-resistant, chemical-resistant, abrasion-resistant and non-conducting.

The arch of the Buckeye logger boots is supported by a steel shank. The shank is sturdy enough to use on ladders. So these can double as lineman boots. These are rated ASTM F2413-11 M I/75 C/75 EH. The top three eyelets have hooks for speed lacing on emergency.

Comfort and Fitment

The ankle shaft of Wolverine Buckeye logger boots stands 9.5” tall. Your feet rest on a plush removable insole that supports the heel and ball while you stand. You get these in 7-14 sizes in medium and wide width. The toebox is spacious in both because of the thinner aluminum alloy cover. The wide version easily houses wide feet.

The insides are lined with 3M thinsulate that keep your feet warm in winter but they aren’t warm enough to be snow boots. There’s no need for a break-in time. They are comfy right out of the box.


  • Lighter, stronger aluminum alloy toe
  • Gore-Tex waterproofing
  • Full-grain leather upper
  • Aggressive Vibram sole
  • 400g 3M Thinsulate


  • The ankle may feel too slim to some people


  1. Georgia Boot Men’s Loggers G7313 Work Boot

Georgia G7313 logger work boots use their own proprietary technology to keep your feet dry, stable and comfortable. They are a steel-toed beauty in its tumbled chocolate color. They use full-grain leather that stands tough in the face of your logging job. The artsy kiltie can be removed if it’s too frivolous for your tastes. These are downright affordable compared to the Chippewa and Timberland boots. So we raced with them right into our best logger boots list.


The Georgia G7313 logger boots show off their full-grain leather construction in the chocolate color. Most noticeable is the fancy kiltie in the front but we hear it can be removed. But we let it remain as it keeps the tongue of the boots safe from scratching against the laces. These handsome leather boots have been create by Goodyear welt method. At this budget, the finest construction method really helps with durability. They would not last as long as the Chippewa Super Logger though. Most people have gotten 1-2 years of rough work out of them.

The ankle shaft is approximately 8” high from the arch of these logger work boots. The steel toes have been rated for the highest level of protection at ASTM F2413-11 standard (I/75 C/75). They also meet ASTM F2413-11 for electrical hazard protection. They have abrasion-resistant sole which lasts as long as the boots but not the trusty Vibram ones. The proprietary Georgia Waterproof system keeps your feet dry inside the shoes. They are lightly lined so that your feet remain cozy in normal to slightly cold weather.  The laces go through some solid eyelets and then hooks at the top. A size 10 pair of these weighs around 6 pounds. They are almost lightweight for logger boots.

Comfort and Fitment

The Georgia G7313 logger boots do not have marketing gimmick names to dole out. These boots creep on, put in the work and slide right off. A steel shank keeps support in order. They have a removable polyurethane insole to make a soft landing for the feet inside. The Georgia waterproof system allows air in so they remain ventilated until the end of the day.

These logger boots come in sizes 7.5-15 in both medium and wide models. Between the two, all types of feet are easily accommodated. Your toes will never have to scurry for space in the toebox.


  • Affordable
  • Highly comfortable
  • Full grain leather construction
  • Highest-rated Steel toe
  • Georgia waterproofing
  • Non conducting sole


  • None


  1. Men’s Carolina CA5821 8 inch 600 Grams Thinsulate Insulated Steel Toe Logger Boots Copper

The Caroline 8” Thinsulate logger boots are classy minimalistic boots. Armed with 600g of Thinsulate insulation, these can be used in the winter. Done in plain brown leather, these boots offer all the usual hazard protection. None of that shows on the smooth build or clean surfaces. The waterproof lining and steel toes keep your feet clean, damage-free and dry. Durable and supremely comfortable with an aftermarket insole, these are just the right pick for the best logger boots list and an alternative list for the best insulated work boots.


The Caroline 8” Thinsulate logger boots are all style in copper crazy horse leather. This leather is known to be long-lasting. These are covered in waterproof Scubaliner that keeps the feet dry on wet forest grounds. The insides of the boots are lined with soft taibrelle lining. They are also lined with 600g Thinsulate. Which is why, you can also use these in winter. We wouldn’t wear them in heat of more than 50° though. The thick lining makes them run smaller than the usual sizes. We would order half size up in these boots.

These logger work boots are based on a single-piece rubber sole. The underside is designed with some aggressive lugs. The arch is supported by a steel shank that keeps you feet fatigue-free after long hours of work. Your toes are guarded by ASTM F2413-05 I/75 C/75-rated steel toes. These are also rated against electrical hazard. The ankle shaft measures 8 inches from the arch. The laces pass through 6 eyelets and 3 hooks that allow you to lace up quickly. The Goodyear leather welt construction ensures that the boots remain in top condition even with continuous use. These are oil and slip-resistant.

Comfort and Fitment

The thinsulate layer of the Carolina CA5821 logger boots doesn’t just keep them warm, it keeps the interiors feeling cozy and soft. The heel digs in for traction but does not stand too high. You can try wearing them with removable sole inserts for everyday use. The steel shank in the arch supports the length of feet even with the impact from logging. These boots come in medium, wide and extra wide models for each size. The one-piece rubber sole feels more stable. So you aren’t required to apply much force with your feet to stay upright on slippery ground.


  • 600g thinsulate lining makes them suitable for winter and fall
  • Highest rated Steel toe
  • Waterproof
  • Goodyear welt construction
  • Non-conductive sole


  • Runs small because of thinsulate layer


  1. Chippewa Men’s 8″ Waterproof Insulated Steel Toe EH 73050 Logger Boot

The Chippewa #73050 logger work boots are beautifully designed with gold on black surface. The black oiled leather shines with the brilliant features it packs. With the trusted Goodyear welt construction, these are durable boots that would easily last 2-3 years through the worst kind of abuse. With their steel toes, insulation and waterproof build, they are an excellent choice for any tough working condition. They have all the features to land them on the best logger boots list, feet first.


The Chippewa #73050 logger boots look downright gorgeous in their black oiled model. The ankle stands 9 inches tall from the arch. They have a removable kiltie which manages to look macho. The Goodyear welt construction adds years to the life of these boots. Even when the sole is busted, the upper remains in good condition. You can get extra years out of them by re-soling. The uppers are sewn securely to the sole rather than stuck with glue. They are done in waterproof leather that keeps your feet dry as bone on a rainy day on the forest floor. All joints are made with double or quadruple stitching. ASTM-rates steel toe bears the maximum pressure possible.

These logger work boots support the feet with a steel shank. They are covered in Chip-a-Tex waterproof lining. They balance you on a Vibram Tacoma one-piece sole. It is steel and oil-resistant. The tall ankle shaft laces up all the way to the top with brass hardware. The laces are waxed so they remain tight. They don’t slip over each other or come undone while you are in the middle of log rolling. These are also ASTM-rated against electrical hazard.

Comfort and Fitment

The Chippewa #73050 logger boots have a brushed Ruby Nylex lining inside them. This swaddles the feet in comfort in all situations. It also wicks away sweat from the feet and keep them fresh. It is lined with 400g 3M thinsulate that can warm up your toes in the fall or early winter. Your feet rest on a removable Texon insole. Along with the steel shank they provide great arch support.

These logger boots are available in sizes 6-14 in medium, wide and extra wide sizes. Each provides more and more room for your wide toebed. The heel is just 1.5 inches tall so you don’t find them so awkward for everyday use. But it’s enough to help you hold your ground.


  • Water and electrical-hazard proof
  • Moisture-wicking Ruby Nylex lining
  • Steel toes and shank
  • Goodyear welt construction
  • Removable kiltie
  • 400g 3M thinsulate


  • Heavy boots


  1. Danner Men’s Super Rain Forest 200 Gram Work Boot

Danner Super Rain Forest are your tough-guy logger boots made in the good ol’ USA. The full-grain leather design is protected by Gore-Tex waterproofing. Goodyear Welt construction and Danner customer service ensure you can get them re-soled easily. Lightly insulated for use in fall and spring, these boots have every feature to keep your tootsies warm and safe. These are expensive but the quality and performance speak for the price. Nothing can keep them from the best logger boots list.


The Super Rain Forest logger work boots look slick in their black color with mustard yellow laces. They use full-grain double thick leather to treat your feet in style. Each joint is held together by triple stitches of nylon thread. The Goodyear welt construction keeps the upper and sole tied securely together. But if the sole alone wears out, you can get them redrafted by Danner themselves. These are available with either composite toe(11550) or soft toe models(11500). Many construction workers would even use these in soft toe model. The double leather is that strong!

The insides of these logger boots are lined with Cambrelle Nylon. 200g thinsulate gives you light warmth against the cold lashing rains outside. But it’s not enough to make them feel bulky or suitable for winters.  Gore-Tex liner protects your feel from water up to 8 inches from the arch. Premium steel shanks hold up the arch of your feet. These boots meet the ASTM F2892-11 electrical hazard rating. Non-conducting soles do not let electricity from exposed wires affect your feet. The boots are mounted on Vibram rubber soles with angled lugs that provide traction in all directions. Wet and dry surface do not stand a chance in front of these Danner boots.

Comfort and Fitment

The Danner Super Rain Forest have a plush removable insole so you don’t have to run to the local store to buy one separately. The shank is great at holding the arch of the foot right. The nylon lining rubs softly on the feet. There are only the rarest chances of shoe-bites that too only if you buy the wrong size.

These logger boots are available in Medium and Wide models for each size. Sizing is not as spot-on as the Chippewa Super Loggers but Super Rain Forest run true to size on the average.


  • Composite/soft toe
  • Double thick leather
  • 200g Thinsulate lining
  • Gore-Tex waterproofing
  • Vibram soles
  • Steel shank
  • Non-conducting sole.


  • Sizing can be tricky at times


  1. Chippewa Men’s 8″ Bay Apache Waterproof Insulated Steel Toe EH 26330 Lace Up Boot

Chippewa Bay Apache logger work boots have the full roster of features required for logging work. Done in washed brown colors, these sturdy Chippewa boots are here to stay for long. From warm to winter months, you can use them almost all year round. Snow does not affect the traction on their soles. The Steel toes are hard enough for loggers. They are waterproof inside out. There are one too many reasons to put them on the best logger boots list.


The Chippewa Bay Apache logger work boots sport a full-grain leather upper decorated only with metal eyelets and hooks. The Goodyear welt construction ensures that style is combined with durability. They have a Chip-a-Tex membrane running through the walls of the boots which make them waterproof. The toe is hardened with a Steel cap. The Steel toe doesn’t get cold enough in winters to freeze your toes.

These logger boots have a Vibram sole. It has aggressive lugs that keep you stable on any difficult or smooth terrain. The inside of the boots have 400g of Thinsulate lining for warmth. They are also lined with Maple Taibrelle which covers your feet in softness. The upper area of the boots have a Dri-Lex layer that is breathable wicks the sweat away. This keeps your feet fresh and stink-free. The heel of the boot isn’t as pronounced as the usual logger boots.

Comfort and Fitment

Inside the Chippewa Bay Apache logger boots, they have a Texon Orthotic insole. It makes a safe bedding for your sole and toes. These boots run true to their size. Most people who used these boots got them right with their usual sizes.


  • Steel toe
  • Waterproof
  • Vibram sole
  • Moisture-wicking lining
  • Detachable Texon sole


  • Need break-in time


  1. AdTec Men’s 9-Inch Logger Boot

The Adtec 9-inch logger boots are the most inexpensive pair on this list. These are soft-toe boots but they are rugged for impact. They are also a cross between casual and logger boots. If you want a set of multipurpose logger boots, these would be it. Oil and water-resistant and stylish to the boot, these are one of the best logger boots.


The Adtec men’s 9-inch logger work boots are done with an all-leather construction. As opposed to the more expensive shoes, they don’t have any liner inside. This is an advantage for many loggers in summer. Although many bootmakers claim that their boots breathe well, they often just choke your feet. With Adtec you can select what sock or liner you want. The leather is pliable and feels pleasant on your feet.

These logger boots have an oiled surface so they are water-resistant. Their ankle shaft stands 9 inches high from the arch. The heel may feel a little more flexible compared to other boots on the list. But their durability is same as the others. The construction of the boots is top-notch considering the price.

Comfort and Fitment

In spite of no liners, the AdTec logger boots do not bruise your feet with continuous wearing. The insoles installed in these boots feel the same as the aftermarket insoles available in stores. These boots are available in medium and wide models per size.


  • Inexpensive
  • Durable construction
  • No liner, no sweating
  • Water-resistant


  • No steel toe


  1. Justin Original Work Boots Men’s Jmax Logger Steel TE Steel Toed Work Shoe

If you are looking for substitute for Chippewa Super Logger work boots from another brand, the Justin Jmax work shoe is the choice. A steel toe keeps your toe safe from a world of pain. These are rugged waterproof boots for work in all conditions. The price is reasonable and the construction is premium. These round off the best loggers boots list appropriately. There is also a list of the best steel toe waterproof  work boots to choose from.


The Justin Jmax logger work boots are a set of large boots. They stand 10.5 inches tall from the arch. They have a 2.25 inch heel and the platform is 1” tall. So the heel feels natural even to someone who is used to flat boots. Meanwhile it provides strong traction on any ground, wet or dry. The 100% leather construction is durable and joined with double and quadruple stitches.

These logger boots have a Vibram sole with aggressive lug pattern. They are completely waterproof for construction work and logging on the rainy days. They also have Dri-Lex lining which wicks away sweat from the feet. These boots are handcrafted in US.

Comfort and Fitment

The Justin Jmax logger boots are outfitted with special Justin Jel removable orthotic insole. These are available in sizes 6.5-14 in Medium and Wide models.


  • Steel toes
  • Vibram soles
  • Dri-lex lining
  • Waterproof


  • None
Bryan Howard

Leave a Comment

seven + 4 =

Show Buttons
Hide Buttons